INSTALLATION / OPERATION FH 7517 EBL 43cm (17") TFT Monitor with LED Backlight FH 7519 EBL 48cm (19") TFT Monitor with LED Backlight
Safety warnings Safety warnings To avoid any damage, please consider the following safety warnings: Never place the device near to heaters, furnaces, other heat sources or under direct solar irradiation. Operate the device only in locations providing the tolerable operating temperature range 0°C~40°C. Make sure that the device‘s ventilation slots are not covered or sheeted. For cleaning, make sure the device is plugged off and only use a damp cloth without acid detergent.
CONTENT Safety warnings ....................................................................................................................................... 2 1 INTRODUCTION................................................................................................................................... 4 2 MAIN FEATURES ................................................................................................................................. 4 3 PACKAGE CONTENTS ...................................
1 INTRODUCTION The TFT monitors FH 7517 EBL and FH 7519 EBL are designed for CCTV installations. The new LED backlight technology provides clear high-contrast images combined with long component lifetime. This new feature allows also dropping down the power consumption more than 40% compared to former models. This monitor series is equipped with newest 4D comb-filter with De-Interlace technology for clear natural color reproduction.
1. 2. 3. 4. 5. INSTALLATION Depending on application, connect the video output of CCTV device (DVR, multiplexer, quad etc.) to the associated video input type (AV, HDMI or VGA). If a composite video signal has to be connected to a second monitor or another video device, use AV1 loop output or AV2 loop output. The video device connected to AV Output must be terminated with 75 Ohm load. If required, connect audio source to "AV Audio" inputs.
7 SETUP All settings of the monitors are managed by an OSD setup menu. Press "MENU" key to open Main Menu: Select a Menu item with "+" or "-" and confirm with "SELECT" key. 7.1 Picture Setup Picture Mode Press “-” OR “+” to select the picture mode: User, Standard, Movie, Vivid User mode allows full manual adjustment Brightness This is used to set the brightness of the screen. Press “-” OR “+” to adjust the parameter. This is used to adjust the image contrast. Press “-” OR “+” to adjust the parameter.
.2 Sound Setup Volume Mute 7.3 Press “-” OR “+” to adjust volume level. ON disables sound, OFF enables sound OSD Setup Language H. Position H. Zoom V. Position V. Zoom Scale mode Recall Press “-” OR “+” to select language. Moves the display picture left or right. Press “ - ” OR “ + ” to adjust the parameter. Adjust the H-size of the display picture Press “ - ” OR “ + ” to adjust the parameter. Moves the display picture up or down. Press “ - ” OR “ + ” to adjust the parameter.
7.4 Picture-in-Picture Setup Multi Window Selection of Multi - Windows mode OFF: PIP: Full screen display of selected video input Picture in Picture mode POP: Picture on Picture mode Both channels are displayed in full height, but cropped left and right. POP 4:3: Picture on Picture mode 4:3 format Both channels are displayed scaled, but not cropped. Sub Source Selection of second video channel for PiP or PoP mode Press “-” OR “+” to select “PC, AV1, AV2, HDMI” Signal Source.
8 SPECIFICATIONS Model FH-7517EBL FH-7519EBL 1. VGA RGB 0.7Vp-p. Input video signal 2. 2 x Composite PAL / NTSC 1Vp-p.(0.7V video+0.3V sync), 75ohm autom. 3. HDMI 1 x HDMI type A 1 x VGA D-sub 15-pin Input terminals 2 x Composite video BNC, 75 Ohm automatic termination 2 x Audio RCA, 1 Audio In 35 mm Stereo 1 x 12 VDC 5,5 mm socket Output video 2 x BNC Composite video 12 VDC / 1,6 A max.
9 DIMENSION DRAWING FH 7517 EBL: FH 7519 EBL: FH7517EBL / FH7519EBL Installation / Operation 10 of 12
10 SUPPORTED DISPLAY MODES VGA 720 x 400p at 70Hz - IBM VGA 720 x 400p at 88Hz - IBM XGA2 640 x 480p at 60Hz - IBM VGA 640 x 480p at 67Hz - Apple Mac II 640 x 480p at 72Hz - VESA 640 x 480p at 75Hz - VESA 800 x 600p at 56Hz - VESA 800 x 600p at 60Hz - VESA 800 x 600p at 72Hz - VESA 800 x 600p at 75Hz - VESA 832 x 624p at 75Hz - Apple Mac II 1024 x 768i at 87Hz - IBM 1024 x 768p at 60Hz - VESA 1024 x 768p at 70Hz - VESA 1024 x 768p at 75Hz - VESA 1280 x 1024p at 75Hz - VESA 1152 x 870p at 75Hz - Apple Mac II
Headoffice Subsidiary Beijing 12F, No.79 Sec.1 Shin-Tai Wu Road, Hsi-Chi, Taipei, Taiwan Tel: +886-2-26982334 Fax: +886-2-26982380 Room 609,Technology Trade Building.
