Instruction Manual EN-75080C / EN-75084C 8” / 8.
Please read this manual thoroughly before use, and keep it handy for future reference.
SAFETY INSTRUCTION ………………………………………………………………….. 2~3 CAUTIONS ……………………………………………………………….......................... 4 FCC RF INTERFERENCE STATEMENT ……………………………........................... 5 CONNECTING WITH EXTERNAL EQUIPMENT ………………………………………. 6 CONTROLS AND FUNCTIONS ………………………………………………………….. 7 ~ 24 MOUNTING GUIDE ……………………………………………………………………….. 25 ~ 26 D-SUB CONNECTOR PIN ASSIGNMENTS ……………………………………………. 27 POWER MANAGEMENT …………………………………………………………………. 28 SPECIFICATIONS ………………………………………………………………………….
INSTRUCTION MANUAL ……………………………………………………………………. 1 Important Safety Instruction 1. Read these instructions. 2. Keep these Instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers,stoves, or other apparatus (including amplifiers) that produce heat. 9.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles and the point where they exit from the apparatus. 11. Only use attachment/accessories specified by the manufacturer. 12. Use only with the cart, stand, tripod, bracket or table specified by the manufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13.
This symbol is intended to alert the user to the presence of uninsulated : dangerous voltage with in the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the user to the presence of important operating and maintenance(servicing) instructions in the literature accompanying the appliance. INSTRUCTION MANUAL …………………………………………………………………….
NEVER REMOVE THE BACK COVER Removal of the back cover should be carried out only by qualified personnel. DO NOT USE IN HOSTILE ENVIRONMENTS To prevent shock or fire hazard, do not expose the unit to rain or moisture. This unit is designed to be used in the office or home. Do not subject the unit to vibrations, dust of corrosive gases. KEEP IN A WELL VENTILATED PLACE Ventilation holes are provided on the cabinet to prevent the temperature from rising.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
A. BACK 1. TRIGGER INPUT Sensor Signal Input 2. AUDIO IN 3.5Φ STEREO IN 3. S-VIDEO IN Y/C separated signal input 4. AV1 OUT Video looping output for AV1 5. AV1 IN Composite signal Input for AV1 6. AV2 OUT Video looping output for AV2 7. AV2 IN Composite signal Input for AV2 8.
6 ……………………………………………………………………. INSTRUCTION MANUAL B. FRONT 1. INPUT Select input source. 2. MENU Activates and exits the On Screen Display. This button can also be used to move previous menu or status. OSD MENU(MAIN) : Input Source, Screen, Audio, OSD, Color, Utility, Exit. 3/4. ▲ / ▼ This button allows user to enter the sub-menu of the activated function ▼ : Auto geometry adjustment in PC Source. 5/6. ◀ / ▶ Adjust the volume / Adjust menu settings. 7. POWER ON/OFF Turns the power ON or OFF.
INSTRUCTION MANUAL ……………………………………………………………………. 7 OSD Menu Description A: CUSTOM MENU (For AV1, AV2 & S-Video Input) 1) Press the MENU button and then press the up(▲) or down(▼) button to select the Custom. 2) Press the up(▲) or down(▼) button to select the sub menu. 3) Press the left(◀) or right(▶) button to adjust the picture setting. 4) Press the MENU button to save. Brightness: Increase or decrease the intensity of the image.
1) Press the MENU button and then press the up(▲) or down(▼) button to select the Custom. 2) Press the up(▲) or down(▼) button to select the sub menu. 3) Press the left(◀) or right(▶) button to adjust the picture setting. 4) Press the MENU button to save. 8 ……………………………………………………………………. INSTRUCTION MANUAL B. Picture / Sound Menu (For AV1, AV2 & S-Video) 1. Picture Mode 1) Press the MENU button and then press the up(▲) or down(▼) button to select the Picture / Sound.
2) Press the right(▶) or INPUT button. 3) Press the up(▲) or down(▼) button to select the Picture Mode. 4) Press the right(▶) or INPUT button. 5) Press the up(▲) or down(▼) button to select the Picture Mode option. 6) Press the MENU button to save 2. Color Tone 1) Press the up(▲) or down(▼) button to select the Color Tone. 2) Press the right(▶) or INPUT button. 3) Press the up(▲) or down(▼) button to select the Color Tone option. 4) Press the MENU button to save.
3. Mute 1) Press the up(▲) or down(▼) button to select the Mute. 2) Press the right(▶) or INPUT button. 3) Press the up(▲) or down(▼) button to select the On or Off. 4) Press the MENU button to save. 4. Volume 1) Press the up(▲) or down(▼) button to select the Volume 2) Press the left(◀) or right(▶) button to adjust Volume setting. 3) Press the MENU button to save.
10 ……………………………………………………………………. INSTRUCTION MANUAL 5. Size 1) Press the up(▲) or down(▼) button to select the Size 2) Press the right(▶) or INPUT button. 3) Press the up(▲) or down(▼) button to select the Size option. 4) Press the MENU button to save. 6.
1) Press the up(▲) or down(▼) button to select the NR. 2) Press the right(▶) or INPUT button. 3) Press the up(▲) or down(▼) button to select the On or Off. 4) Press the MENU button to save. INSTRUCTION MANUAL ……………………………………………………………………. 11 7. 3D Comb 1) Press the up(▲) or down(▼) button to select the 3D Comb. 2) Press the right(▶) or INPUT button. 3) Press the up(▲) or down(▼) button to select the On or Off. 4) Press the MENU button to save.
8. Camera 540 3) Press the up(▲) or down(▼) button to select the Camera 540 menu. 4) Press the right(▶) or INPUT button. 5) Press the up(▲) or down(▼) button to select the Camera 540 option. 6) Press the MENU button to save. 12 ……………………………………………………………………. INSTRUCTION MANUAL B. Picture / Sound Menu (For PC Input) 1.
1) Press the MENU button and then press the up(▲) or down(▼) button to select the Picture/Sound. 2) Press the right(▶) or INPUT button. 3) Press the up(▲) or down(▼) button to select the Picture Mode. 4) Press the right(▶) or INPUT button. 5) Press the up(▲) or down(▼) button to select the Picture Mode option. 6) Press the MENU button to save. 2-1. Color Tone 1) Press the up(▲) or down(▼) button to select the Color Tone. 2) Press the right(▶) or INPUT button.
INSTRUCTION MANUAL ……………………………………………………………………. 13 3) Press the left(▶) or INPUT button again. 4) Press the up(▲) or down(▼) button to select the Color Tone option. 5) Press the MENU button to save. 2-2. Color Tone (Custom) 1) Press the up(▲) or down(▼) button to select the Custom in the Color Tone.
2) Press the Menu button to save. 14 ……………………………………………………………………. INSTRUCTION MANUAL 3) Press the up(▲) or down(▼) button to select the Red(R), Green(G) or Blue(B). 4) Press the left(◀) or right(▶) button to adjust color density. 5) Press the MENU button to save. 4.
1) Press the up(▲) or down(▼) button to select the PC. 2) Press the right(▶) or INPUT button. 3) Press the up(▲) or down(▼) button to select the PC sub menu. 4) Press the right(▶) or INPUT button. 5) Press the left(◀) or right(▶) button to adjust the PC setting. 6) Press the MENU button to save. Auto Adjust: Auto geometry adjustment. Phase: Adjust the number of horizontal picture elements. H-Position: Move image horizontally on screen right or left. V-Position: Move image vertically on screen up or down.
1) Press the MENU button and then press the up(▲) or down(▼) button to select the Setup. 1. Reset 1) Press the right(▶) or INPUT button 2) Press the right(▶) or INPUT button again. 3) Press INPUT button to execute the reset. Reset: All settings go to the factory initialization. 16 …………………………………………………………………….
2. Language 1) Press the up(▲) or down(▼) button to select the Language. 2) Press the right( ) or INPUT button. 3) Press the up(▲) or down(▼) button to select language. 4) Press the MENU button to save. 3. OSD Tone 1) Press the up(▲) or down(▼) button to select the OSD Tone. 2) Press the right( ) or INPUT button 3) Press the up(▲) or down(▼) button to select the OSD Tone option. 4) Press the MENU button to save. INSTRUCTION MANUAL …………………………………………………………………….
4. Blue Screen 1) Press the up(▲) or down(▼) button to select the Blue Screen. 2) Press the right( ) or INPUT button. 3) Press the up(▲) or down(▼) button to select the On or Off. 4) Press the MENU button to save. 5. Key Lock 1) Press the up(▲) or down(▼) button to select the Key Lock. 2) Press the right( ) or INPUT button 3) Press the up(▲) or down(▼) button to select the On or Off 4) Press the MENU button to save.
18 ……………………………………………………………………. INSTRUCTION MANUAL 6. Trigger 1) Press the up(▲) or down(▼) button to select the Trigger. 2) Press the right( ) or INPUT button. 6-1. Trigger Enable 1) Press the up(▲) or down(▼) button to select the Trigger Enable. 2) Press the right( ) or INPUT button. 3) Press the up(▲) or down(▼) button to select the On or Off. 4) Press the Menu button to save.
INSTRUCTION MANUAL ……………………………………………………………………. 19 6-2. Trigger Input 1) Press the up(▲) or down(▼) button to select the Trigger Input . 2) Press the right( ) or INPUT button. 3) Press the up(▲) or down(▼) button to select the Trigger Input option. 4) Press the Menu button to save. 6-3. Buzzer 1) Press the up(▲) or down(▼) button to select the Buzzer. 2) Press the right( ) or INPUT button. 3) Press the up(▲) or down(▼) button to select the On or Off. 4) Press the Menu button to save.
20 ……………………………………………………………………. INSTRUCTION MANUAL 6-4. Trigger Time 1) Press the up(▲) or down(▼) button to select the Trigger Time. 2) Press left( ) or right( ) button to adjust Trigger Time setting. 3) Press the MENU button to save. 6-5 Trigger Option 1) Press the up(▲) or down(▼) button to select the Trigger Option. 2) Press the right( ) or INPUT button. 3) Press the up(▲) or down(▼) button to select the Trigger Option setting. 4) Press the Menu button to save.
N/C (Normal Closed): When Trigger cable is opened, Trigger function is activated. N/O (Normal Opened): When Trigger cable is closed, Trigger function is activated. High: When Trigger signal is high(2~5[V]), Trigger function is activated. Low: When Trigger signal is low(0~0.6[V]), Trigger function is activated. INSTRUCTION MANUAL ……………………………………………………………………. 21 7. Auto switching 1) Press the up(▲) or down(▼) button to select the Auto switching. 2) Press the right( ) or INPUT button. 7-1.
1) Press the right( ) or INPUT button. 3) Press the up(▲) or down(▼) button to select the On or Off . 4) Press the Menu button to save. 22 ……………………………………………………………………. INSTRUCTION MANUAL 7-2. Auto switching Inputs enabled 1) Press the up(▲)or down(▼) button to select the Inputs enabled. 2) Press the right( ) or INPUT button. 3) Press the up(▲) or down(▼) button to select the Input. 4) Press the right( ) or INPUT button.
5) Press the up(▲) or down(▼) button to select the On or Off and then press the Menu button to save. INSTRUCTION MANUAL ……………………………………………………………………. 23 7-3. Auto switching Time 1) Press the up(▲) or down(▼) button to select the Time.
2) Press the left(◀) or right(▶) button to adjust the Time and then press the MENU button to save.
24 ……………………………………………………………………. INSTRUCTION MANUAL A. Wall mount(Optional) 1) Using the 75 mm VESA holes. 2) Using the VESA standard wall mount design and the 75mm hole pattern on the back side to install the LCD monitor to the wall.
INSTRUCTION MANUAL …………………………………………………………………….
B. Rack mount(Optional) 1) Install the monitor in the Pre-Rack using the 75 mm VESA holes. 2) Install the Pre-Rack in the Open Rack using side mounting holes. ※ The Pre-Rack is available rotation of 360° on the Open Rack.
26 ……………………………………………………………………. INSTRUCTION MANUAL ▶ PIN ASSIGNMENTS Pin 1 RED VIDEO 9 2 GREEN VIDEO 10 SIGNAL CABLE DETECT 3 BLUE VIDEO 11 GROUND 4 GROUND 12 SDA(for DDC) 5 GROUND 13 H-SYNC.(or H+V SYNC.) 6 RED GROUND 14 V-SYNC. 7 GREEN GROUND 15 SCL(for DDC) 8 BLUE GROUND ACCESSORY 1. POWER CORD 2. USER’S MANUAL 3. PC cable 4. Adaptor 5. Trigger Cable(Option) 6. Wall mount (Option) 7.
INSTRUCTION MANUAL ……………………………………………………………………. 27 This monitor features a power management system to “power down” upon receipt of the VESA DPMS(The display power management signaling) from a VESA DPMS video card. The VESA DPMS-compliant video card performs this signaling system through not sending horizontal, vertical, or sync signal. This monitor enters an appropriate mode through identifying each of the three modes of the signaling system.
UNSUPPORTES MODE POWER OFF Normal operation but the on screen GREEN Display will show error massage RED Not Operation 28 ……………………………………………………………………. INSTRUCTION MANUAL 8RTC LCD-Type 8RTF’ 8’’ Diagonal AM-TFT(Active-Matrix) 8.4’’ Diagonal AM-TFT(Active-Matrix) Pixel pitch(mm) : 0.2025(H) x 0.2025(V) Pixel pitch(mm) : 0.213(H) x 0.
ACTIVE DISPLAY AREA (H x V) PACKING DIMENSIONS (W x D x H) 162mm x 121.5mm 170.4mm X 127.8mm 215.3mm x 40.4mm x 184.3mm 215.3mm X 40.4mm X 184.3mm Net Weight : 1.1Kg Net Weight : 1.19Kg Gross Weight : 2.25Kg Gross Weight : 2.34Kg DC 12V/ 3.33A DC 12V/ 3.33A WEIGHT ELECTRICAL RATINGS ▶▶ NOTE : Technical specifications are subject to change without notice. INSTRUCTION MANUAL …………………………………………………………………….
WEEE Symbols Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.
Taiwan - Headquarter Office China - Beijing Office 12F, No.79 Sec.1 Shin-Tai Wu Road, Room 609,Technology Trade Building.
