User`s manual

6.4.2.5 Motion

Users can define the motion areas to be detected by left clicking the mouse to draw

lines. Every click is an end point of the line. When the detection area is formed,

double click the mouse to make all the lines connected.

Press to update the current image.

Press to have the entire screen selected for motion detection.

Press and click on the polygon, to clear that polygon.

Press to clear all selections.

There are 5 possible motion trigger areas, which can be distinguished by 5

different colors. Check the Enable checkbox to enable event actions related to that

area.

For each area, you can set the event action in response to motion detection in that

area. Event actions can be set in “Event” section.

In addition, you can set the Sensitivity level for the motion trigger separately for

each area by selecting from 1 (low), 2, 3, 4, 5, 6, 7, 8, 9 to 10 (high).