User`s manual

64
h. If tracking start point is outside the limits, the screen will show
“ START POS IS OUTSIDE LIMIT. SET START POS” (see below
example screen) and user has to reset a start position between up and
down limits.
<Clear Pan/ Clear Tilt>
a. Click “Up” and “Down” arrows to select Clear Upper/ Clear Lower
option.
b. Click IRIS In button , to clear the setting.
Set tracking mask
Checking this item and click its Set button to enter its setting window. See setting
details below.
Tracking Mask Window
<Set Tracking Mask>
a. Click “Up” and “Down" arrows to select desired Mask number from 1
to 4.
b. Click IRIS In button , to enter selected Tracking Mask Size
window.