User`s manual

62
Pan Range Setting – Right Limit Setting
e. Use arrows buttons and buttons to locate a desired right
limit point.
f. Click IRIS In button to save and return, or Click IRIS Out,
button to return.
g. If tracking start point is outside the limits, the screen will show
“ START POS IS OUTSIDE LIMIT. SET START POS” (see below
example screen) and user has to reset a start position between left and
right limits.
<Set Tilt Upper Range>
a. Click “Up” and “Down” arrows to select “Upper” option.
b. Click IRIS In button , to enter tilt range setting.