User`s manual

Tracking

How to set Auto Tracking Start point:

1. Checking “Auto Tracking Start Point” item.

2. Select a desired start point by using “Arrow” buttons of the PTZ control panel

to locate a desired position. User can also use “Zoom In/ OUT”, “Focus

Far/Near”, “IRIS +/-“ buttons at the PTZ control panel to help locating a

desired position in this step. “Speed” option allows user to browse with

different speeds, including High, Standard, Low and Minimum.

3. Click “Set” button at to save this selected start point, or Click “Clear” button

to clear this point. “Go” button allow user to see selected start point on screen.

Set Pan/ Tilt Limits

1. Set Pan/ Tilt Limits by checking this item and clicking its Set button to enter

its setting window. See setting details below.