User`s manual

59
Video – Camera –Set Pattern - Recording Tour Seconds
3. Use “Arrow” buttons, “Zoom In/ Out”, “Focus Far/Near”, “Iris +/-“ buttons and
“Speed” option to operate camera on a desired pattern.
4. After completing pattern operations, click “Complete” button to save this pattern
tour. At this time, the live screen will show “Saving Pattern….”. User can also
click “Clear” button to clear a pattern or click “Go” to run and see a preset pattern
on live screen.
Tour
Max. 16 positions can be set for a tour and there are 16 tours for user to preset for a
camera. To configure preset tours for a camera:
1. Mode: Select from three modes: OFF/ Preset/ Pattern.
2. Value: Enter Preset/Pattern No. Before selecting preset/Pattern mode, user needs to
set a preset position/ pattern in advance.
3. Dwell Time: Set dwell time of the tour from 1~99 sec. This option is exclusive for
Preset mode here.
4. Speed: Select tour speed from 1 ~255. This option is exclusive for Preset mode.
5. Click “Apply” button to save changes. User can also click “Reset” button to make
options to default values.
6. Default: Press “Default” button to set all the values to default values.
7. Go Tour: Press “Go Tour” button to run a preset tour.
Note: to stop running Pattern, click on live screen once.