User`s manual
57
Preset
To preset a position:
1. Select Endless Mode on or off.
ON: enable endless mode. The speed dome will perform 360 degree endless
auto-pan.
OFF: disable endless mode. The speed dome will perform auto-pan between
preset left and right positions.
If ON is select at this step, go to step 7 directly.
2. Set Left Pos.: Select a desired left position by using “Arrow” buttons to locate
a desired position. User can also use “Zoom In/ OUT”, “Focus Far/Near”,
“IRIS +/-“ buttons to help locating a desired position in this step. “Speed”
option allows user to browse with different speeds, including High, Standard,
Low and Minimum. This step needs to be done only when Endless Mode is
off.
3. Click “Set” button right next to “Set Left Pos.” to save this selected left
position.
4. Repeat step 2 to select a desired right position.