User`s manual

6.4.1.2.3 Wireless

IP Setting

1. Enable: Check the box to enable wireless connection.

2. SSID: Name of the wireless network the camera. The field accepts up to 32

alphanumeric characters. The name must be exactly the same as the one used in the

wireless access point or the connection will not be established.

3. Security Type: None, WEP, WPA-PSK or WPA2-PSK.

4. Network Type: Infrastructure or Ad-Hoc. Default is Infrastructure.

“Infrastructure” Make the Network Camera connect to the WLAN via an Access

Point.

“Ad-Hoc” Make the Network Camera connect directly to a host equipped with a

wireless adapter in a peer-to-peer environment.

5. Channel NO: Shows the wireless channel currently in use. Default is 1.

6. IP Type:

DHCP: Configure the DHCP server not to assign the same IP addresses used for

the other network cameras and PCs whose IP address is unique.

Refer to the network administrator for the settings of the server.

Default: DHCP.