User`s manual

51
6.4.1.2.2 Network
IP Setting
1. IP Type:
DHCP: Configure the DHCP server not to assign the same IP addresses used for
the other network cameras and PCs whose IP address is unique.
Refer to the network administrator for the settings of the server.
Static IP: User can manually set the static IP for network connection.
PPPoE: This is for a DSL DIRECT connection application; the ISP will require a
user name and password. (That is, if a single camera is connected directly to the
DSL modem.)
2. IP Address: When not using DHCP, enter the IP address of the camera. Avoid
address conflicts; do not enter an IP address already used for a PC or other
network cameras. Every device on an IP network must have a unique IP address.
3. Subnet Mask: This field is to set the netmask for your network so as the IP camera
will be recognized within the network. Example: 255.255.255.000 typical for a
Class “C” network. When DHCP is selected, the DHCP server will assign this
value automatically.