HD CCTV Digital Video IR Vandal Dome Camera O PE R AT ION MANUAL EHH5040
CONTENTS 1. CAUTIONS 2. FEATURES 3. EQUIPMENT AND ACCESSORIES 4. CAMERA COMPONENT DESCRIPTION 5. INSTALLATION 6. DIMENSIONS 7. SPECIFICATIONS 8.
1. CAUTIONS This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions; 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Note This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
1. CAUTIONS Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicate that it should not be disposed with other household wastes at the end of its working life.
2. FEATURES •High Resolution 1/3˝ SONY Progressive Color CMOS Sensor, 1280x720 30fps • Supports Various Digital Video Output 720p 30, 720p 60 720p 25, 720p 50 • Video Outputs Primary HD-SDI (BNC) Test/Setup TV Out (Test Point-adapter to BNC Included), NTSC /PAL selectable • S/N Ratio : Max 50dB • IP66 Weather Resistant • OSD menu for setup and configuration • Lens 3 ~ 9 m m M e g a - P i xe l D C IR IS Vari focal Lens( ICR) F o r F l e x i b l e Fi el d o f Vi ew A d j ustm ent and Light Level Contr ol.
3.
4.
5. INSTALLATION Template Plastic Anchors(3ea) Screws(3ea) Cover Screws(3ea): are “captive and will normally be retained in cover. They are shown here for illustration purposes.
5. INSTALLATION • CONNECTION CLOSE COVER TO HD SDI IN HDCCTV DVR OR OTHER HDCCTV SIGNAL EQUIPMENT DC12V REGULATED / AC24V POWER SUPPLY Service Video Connector RS485(+) (Future Feature) RS485(-) (Future Feature) OPEN COVER VIDEO IN HANDHELD TEST CABLE When you install the camera, please seal the ends of cables to protect the camera connections from humidity problems.
6. DIMENSIONS Unit: mm(inch) Ø112.8(4.44) 123.4(4.85) 71.5(2.81) Ø107(4.21) Ø151(5.94) Ø124(4.
7. SPECIFICATIONS Image Device Effective Pixels Unit cell size Video output mode H.Resolution 1 /3 ” SON Y Mega-P i xel C ol or P rogressi ve C MOS 1329 (H ) x 1049 (V ) 30fps 3.63um (H ) x 3.63um (V ) HDCCTV : 720p 30, 720p 60, 720p 25, 720p 50 TV Out : NTSC / PAL selectable More than 800 TV Li nes Minimum illumination 0 Lux S/N Ratio Shutter speed Max 50dB A uto / Manual sel ectabl e Min. Exposure Time Flickerless 110.
8.
8 .
8 .
8 . OSD MANUAL - IMAGE Menu IMAGE SHARPNESS 0 ~ 15 IMAGE FLIP OFF, H FLIP, V FLIP, H/V FLIP DNR OFF, LOW, MID, HIGH GAMMA OFF, 1.0, 1.8, 2.2, 2.6 - SPECIAL Menu SPECIAL SYSTEM INFO USER SET SAVE USER SET LOAD USER SET CLEAR USER SET FACTORY RESET CAMERA RESET COMM SET FOCUS MODE RS485 Address 0~255 TEMP.
8 . OSD MANUAL • ICONS - : Value adjustment(use LEFT/RIGHT button). - : Select Sub Menu(use SET button). - : Execution command(use SET button). - : Return to previous menu. - : Menu OFF. - : Information. The [SETUP] menu will show up when you push the SET button • Main Menu [ SETUP ] 720p 60Hz DC IRIS VIDEO OUT LENS EXPOSURE WHITE BALANCE DAY / NIGHT IMAGE SPECIAL AUTO AUTO EXIT SAVE & EXIT - VIDEO OUT : Select SDI Out format and TV Out format.
8 . OSD MANUAL • Video Out [ VIDEO OUT ] SDI TV OUT FORMAT FORMAT 720p 60Hz NTSC ESC EXIT SAVE & EXIT - SDI Format Select SDI output Formats – 720p 30Hz, 720p 60Hz, 720p 25Hz and 720p 50Hz. - TV Out Format Select NTSC / PAL. Note : NTSC or PAL Video Format can be selected by pressing the RIGHT Button even when the OSD Menu is turned off - ESC Back to the previous • LENS [ LENS ] LENS TYPE BRIGHTNESS IRIS SPD ESC EXIT SAVE & EXIT DC IRIS 123 1 - LENS TYPE DC IRIS.
8 . OSD MANUAL • EXPOSURE - BRIGHTNESS Same as the BRIGHTNESS value in LENS Menu. Using Left / Right button, adjust Brightness value. - SHUTTER Using Set button, go to the SHUTTER sub menu. - AGC MAX Using Left / Right button, adjust AGC Max value. - BLC Using Left / Right button, select on/off of BackLight Compensation Control.
8 . OSD MANUAL • WHITE BALANCE [ WHITE BALANCE ] MODE R GAIN B GAIN MANUAL 100 100 ESC EXIT SAVE & EXIT - MODE Using Left / Right button, select White balance modes – ATW, PUSH and MANUAL. ATW Auto Trace White Balance mode PUSH White Balance Push Lock mode (Auto White Balance Control & Lock) MANUAL Manual White Balance mode - R GAIN This menu appears on screen when MANUAL is selected. Using Left / Right button, adjust Red Gain. -B GAIN This menu appears on screen when MANUAL is selected.
8 . OSD MANUAL • Day / Night [ DAY / NIGHT ] AUTO 50 100 MODE DAY LEVEL NIGHT LEVEL ESC EXIT SAVE & EXIT - MODE Using Left / Right button, select modes – AUTO, COLOR, and BW. AUTO Controlled by Signal from CDS sensor. (Photocell) COLOR Fixed Day State. Color Image. BW Fixed Night State. BW Image. - DAY/Night Levels This menu can be displayed by selecting AUTO or EXT in the MODE Menu. The Day Level and Night Level thresholds function independently from each other.
8 . OSD MANUAL • IMAGE [ IMAGE ] SHARPNESS IMAGE FILP DNR GAMMA 0 OFF OFF 1.0 ESC EXIT SAVE & EXIT - SHARPNESS: Using Left / Right button, adjust sharpness value. - IMAGE FLIP: Using Left / Right button, select Flip modes – OFF, H FLIP, V FLIP and H/V FLIP. - DNR: Using Left / Right button, select Digital Noise Reduction Modes - OFF, LOW, MID, HIGH. - GAMMA: Using Left / Right button, adjust gamma control setting.
8 . OSD MANUAL - USER SET Using Set button, display [USER SET] sub menu. - FOCUS MODE In focus mode, the iris becomes fully open, electronic shutter controls the light level, and the TV out screen zooms into the center in order to make focusing easier. When in Focus Mode, the OSD Menu is not displayed. The OSD Menu can be toggled ON and OFF using the Left / Right button. > TV Out Image FOCUS MODE OFF FOCUS MODE ON - LANGUAGE Select OSD Language.
8 . OSD MANUAL • COMM SET (Sub Menu) [ COM / GPIO SET ] RS485 Address (Future Feature) TEMP. HIGH 40 ESC EXIT SAVE & EXIT - RS485 Address Future Feature. - TEMP. HIGH Set the temperature (degrees Celsius) where the fan turns ON & Off.
EverFocus Electronics Corp. Corporate Headquarters: 12F, No.79 Sec. 1 Shin-Tai Wu Road, Hsi-Chih, Taipei, Taiwan TEL: +886-2-26982334 FAX: +886-2-26982380 www.everfocus.com.tw marketing@everfocus.com.tw China Office: Room 609, Technology Trade Building, Shangdi Information Industry Base, Haidian District, Beijing, China 100085 TEL: +86-10-62973336~39 FAX: +86-10-62971423 www.everfocus.com.cn marketing@everfocus.com.cn U.S.