Specifications

5
5. Wire Connection
Connect the power supply cable (AC24V/DC12V), video output and alarm output to
the proper connectors shown as Figure 7.
The V. Phase adjustment screw is located on the termination board. The vertical phase
may require adjustment to synchronize the vertical phase of the camera with other
camera in the system when it is to be used in the line-lock sync mode. Make the
adjustment when the vertical phase of the camera does not match with other cameras.
Termination Board
Video
Alarm COM
Micro Switch for Alarm trigger
GND
Alarm NO
Alarm NC
Power In
DC12V
(+) or AC24V
V. Phase Adjustment VR
Figure 7
Power In
AC12V
(-) or AC24V