User`s manual

EFN3320 Fisheye Camera

Icon Name: Descriptions

UI Style Switch: Click to switch the user interface style between Dark and Light.

Snapshot: Click the Snapshot button to take a snapshot. By default, the snapshot will be

saved at C:\EverFocus\. To change the location, see Record to Local in 7.1.3 Storage.

Note: For Microsoft IE10 and above users, some settings have to be complete to enable

this function (see B. Snapshot/Record error message in 10. Troubleshooting).

Recording: Click the Record button to start / stop recording the current video stream. By

default, this icon is only for one-minute video recording and the recordings will be saved

at C:\EverFocus\. To change the recording time, see File Size in 7.1.3 Storage. To change

the location, see Record to Local in 7.1.3 Storage. To record long-period recordings, please

set up a recording schedule (see Schedule Settings in 7.3.2 Event). To change the source

video stream and recording format, see Recording and Snapshot Settings in 7.1.3 Storage.

Note: For Microsoft IE10 and above users, some settings have to be complete to enable

this function (see B. Snapshot/Record error message in 10. Troubleshooting).

Audio: Click to turn on/off the audio function. This button is only appeared if your camera

features the audio-out cable. Click to play the camera audio through the computer’s

speakers. To activate the Audio function, the Enable Audio must be selected. See Audio

Settings in 7.2.1 Streaming and Audio. Note that the camera provides a line out 3.5mm

jack (TRS), therefore, speakers with a (built-in) amplifier and external power supply are

required.

Microphone: This button is only appeared if your camera features the audio-in cable. Click

to switch the sound on/off for the microphones. To en able the icon, the microphones

should be connected to the camera directly or via the network. To activate the

microphone function, the Enable Audio must be selected. See Audio Settings in 7.2.1

Streaming and Audio. Note that the camera provides a line in 3.5mm jack (TRS), therefore,

microphones with a (built-in) amplifier and external power supply are required.

Setting: Click to enter the general settings page (see 7. General Settings).

Playback: Click to switch to the Playback window. Please refer to 5.1 Remote Playback

Using Playback Page.

ePTZ: Click to display the PTZ control panel for operating the fisheye PTZ function (see 6.2

PTZ Settings).

eZ Tracker: Click to

enter the eZ Tracker Setting page for operating the eZ Tracker function

and calibrating the images between the fisheye and speed dome camera (see 6.3 eZ

Tracker).

View Mode: Click to select a view mode. The options vary among different mounting

types (see 6.4 View Mode).