User`s manual

EFN3320 Fisheye Camera
24
5.2.2 Testing the Playback Function
1. To test the Playback function (this is not required), set up a “Manual Trigger” Recording Event by
clicking Event Settings > Event.
2. Give the event a name, like “Test 1”.
3. In the “Event Triggered Type” field, click on Manual Trigger.
4. Below this, check “Enable This Event”, “Enable Post-trigger Buffer”, and “Record to SD Card”.
5. To save your settings, click the Create button, and the Event will be listed in the Event List.