User manual

NAV IP Access controller



77

8. BasicSetting

ThischapterwillintroducebasicsettingofEverAccess®NAVController.Itisincludingchangepassword,

user groups setting, user setting, local server configuration, system upgrade and center server

configuration.

ChangePassword:reviseloginpassword.

User Groups setting: add, delete and modify the software and permission groups. No limit on their

number,

theusercanaddpermissionsgroupsasneeded.

Usersetting:add,deleteandmodifytheusersoperatethesoftware.Thedefaultadministratorisadmin.

Ithasalloperatingprivileges,onlymodifythepasswordofsuperadministrator.

Localseverconfiguration：ConfigureIPtype,address,gateway,date,timeandsoon.

System

Update:upgradeonlineandupgradelocal.

Center server configuration: center server configuration refers to the “ENS2000 NAV series WEB

Network Access Control Management software” (not the built‐in software) address and password

configurationetc.Theconfiguredcontrollercanbeusedasasub‐stationtobeconnectedandmanaged

tothe

ENS2000software.



8.1ChangePassword

Here Password is for the current user logging to NAV Controller built‐in browser software, it just only

modifyitsloginpassword.

First of all, the user must input the old password,  then enter and repeat the new password. Click the

“Save”buttontosave.Iftheinputiswrong,user

canusethe“Reset”buttontorefill.

Figure8‐1ChangePassword



Chapter