User manual

NAV IP Access controller



1

1. Introduction

TheNAVIPaccesscont rollerisapowerfulLinux‐basedcontrollerwithmodulardesign.Youcan

addupto4doormodulestotheNAVcontrollerforexpandingthecontrolscaleofupto8

doors/readers.OryoucanaddonealarmmoduletotheNAVcontrollertomanageupto10

alarminputsand18alarmoutputs.



Moreover,eachNAVcontrollercanconnectupto 31EverFocus’Flexseriescontrollersto

expandthecontrolscaleofupto256doors/readers.Youcanconnect totheNAVcontroller

vianetworktoremotelyreview,monit oralltheeventsonNAVandFlexcontrollersand

configureall31Flexseriescontrollersfromth esamebuilt‐inbrowser‐basedmanag ement

software.Furthermore,youcan optionallyinstallmultipleNAVcontroll ersforalargerscale

accesscontrolsystem.By doingso,youwillneedtheen terpriselevelNavigationsoftware

installedas acent ralservertomanagethelargeaccesscontrolsystem.



Figure1‐1



ThefollowingtableliststhemodelsofNAVIPaccesscontrollersalongwiththesupported

numberofdoors,readersandalarminputs/outputs.Adescriptionforthesupported

modulesanddevicesisalsoprovidedbelow.



Chapter