Installation guide

EDN Series

8. Place and screw the camera body back to the camera case.

9. Connect the network, power and other cables to the camera. Refer to 2. Cables.

10. Optionally insert a micro SD / SDHC card to the card slot. See No.5 in 1. Overview.

11. Access the camera live view. See 4. Accessing the Camera. Or using the Test-Out cable to

connect a monitor to the camera for setting image aim and focus.

12. Adjust camera lens and angles.

a. Use the Zoom / Focus screws to adjust camera lens.

Zoom Screw

Focus Screw

b. To adjust the camera to a desired angle:

Pan Adjustment: Simply turn left / right of the top camera body.

360°