User`s manual
EDN Plus Series
48
White Balance Settings: Select the mode that delivers the best quality image for the camera’s light
environment. There are five options: Auto, Manual, Indoor, Outdoor, One Push.
Auto: Select to let the camera automatically adjust the White Balance. In the Auto mode the
camera computes the white balance value output using color information from the entire
screen. It outputs the proper value using the color temperature radiating from a black subject
based on a range of value from 3000 to 7500K.
Manual: Select to adjust the Red and Blue values yourself in the fields below this field.
One Push: Select to enable the Push button next to the Mode drop-down field. This will
allow you to force the camera to readjust the white balance every time you push the Push
button. The lens will hold the same focal position until the next trigger command is received.
This function helps to prevent incorrect focusing in dark environments. This function is only
available for EDN3160 Plus / 3260 Plus.
Day/Night Settings:
Auto: Select to let the camera automatically switch to Night mode (black and white) when the
light levels fall to a specified level, and back to Day mode (color) when the light levels rise to a
specified level.
Day: Select to keep the camera in Day mode (color), even in nighttime.
Night: Select to keep the camera in Night mode (black and white), even in daytime.
IR Smart Settings: Select ON and set up the level to enhance the image quality when the images
are over exposure. This function is useful when the camera is in the Night mode. This function is
only available for EDN3260 Plus.
Saturation: Set the saturation value. This function is only available for EDN3160 Plus / 3340 Plus.
Mirror: Switch Mirror ON to rotate the image horizontally around a vertical axis.
Flip: Switch Flip ON to rotate the image vertically around a horizontal axis.
Negative: Switch this setting ON to view a color negative version of the video image. This is useful
at night or when viewing temperature-sensitive images.
Monitor Type: Select a gamma value from Set 1, Set 2 or Set 3. This function is only available for
EDN3160 Plus.