User`s manual

EDN Plus Series
47
For EZN3260 Plus:
HLC Level: Select a level for the HLC setting. The higher the level, the more the highlight
compensation.
HLC Mode: Select All Day / Night mode to apply the HLC function.
HLC Black Mask: Select On / Off to apply the black mask on the selected areas. The
over-exposure portions within the selected areas will be applied with the black mask.
Color Tabs: You can set up four HLC areas with different colors. To set up a HLC area, click the
Edit Area button and then click on the color tab to turn your mouse cursor into a pen of that
color. Move the cursor to the position on the right screen where you want the HLC rectangle to
start and then click. Move your cursor to the position (diagonally opposing corner) where you
want the HLC rectangle to end and then click. Select ON from the color tab drop-down list. The
rectangular area with the selected color will be applied with the HLC function.
Noise Reduction Settings: This limits the amount of digital “video noise” that is usually found in
any video stream, and helps to reduce file size. The higher the level, the more the reduction.
For EDN3160 Plus / 3340 Plus:
Select ON / OFF to enable / disable the Noise Reduction function. Or select Auto to let the camera
automatically enable / disable the Noise Reduction function. Slide the Level bar to set up the level.
The higher the level, the more the reduction.
For EDN3260 Plus:
2D DNR: Select ON to enable the 2D DNR function.
3D DNR: Select ON to enable the 3D DNR function. You can further set up the following settings.
 3D Start AGC: Set up the AGC level to automatically start the 3D NR function.
 3D End AGC: Set up the AGC level to automatically stop the 3D NR function.
 3D Level: Set up the 3D DNR level.
 Smart NR: Select ON to enable the Smart NR function. The 3D NR function will be
automatically turned on when a motion event occurs.