User manual

3.5 PLAYBACK

The playback bar is the fastest way to show video from the exact time which users want to see. The

playback bar allows a user to see both a time line and the current playback indicator. The user can then

click the time line to move the indicator to the position which they want to see. The operation is as follows:

To playback:

By mouse: Right-click to bring up the menu bar and click on to enter Playback Menu.

By front panel: Press

key to enter Playback Menu.

The playback bar will show (see figure below):

2009/05/25 09:09:30PM 2009/05/25 09:09:40PM 2009/05/25 09:10:30PM

1. Stop key: press to stop playback

2. Slow Reverse key: press to start slow reverse playback

3. Pause key: press to pause playback

4. Slow Forward key: press to start slow forward playback

5. Fast Reverse key: press to start fast reverse playback

6. Reverse key: press to start reverse playback

7. Forward key: press to start forward playback

8. Fast Forward key: press to start fast forward playback

9. Time bar: Move the slider on the time bar to the select time to playback (The start time and end time for

time bar appears below the bar). The status of each camera is represented by different colors on the

time bar. Green means normal; orange indicates a Motion; blue indicates Video Loss, red indicates an

alarm event.

10. “+” and “-“ signs are used to adjust the time scale range for the bar. Press “+” or “-“ to select between

scale levels L1 ~ L5. When changing level, the start time and end time of the time bar will change

L1: Entire time bar is 2 days

L2: Entire time bar is 30 hours.

L3: Entire time bar is 1 hour.

14 15