Instruction manual

81
4.10 System Setting
Figure
4-35 is a screenshot of the SYSTEM SETTING MENU. This menu is for setting up general system
parameters for the DVR.
Figure 4-35 System Menu – Date/Time
4.10.1 Date/Time
Date Set current Date.
Time Set current Time.
Date Format Choose date format from yyyy/mm/dd, dd/mm/yyyy, and mm/dd/yyyy.
Time Format Select time format 12H or 24H.
Time Zone Select the time zone of current location.
NTP Enable / disable automatic time synchronisation by NTP server.
NTP Server Enter IP-Address of a valid NTP server.
To find a compatible NTP address, please follow these steps:
a) Go to a PC that is connected to the internet.
b) Click on “START” -> “RUN” -> type “command” and press “OK”.
c) In the DOS Prompt, type “ping pool.ntp.org” to find out the IP address of an
NTP Server.
NTP Update Interval Define the update interval for NTP time synchronisation (daily, weekly or monthly)