Instruction manual

76
4.7.4 Alarm Server
The ECOR264 can send network alarm notification to PowerCon software and other central management
systems, which support this function.
The notification can be transmitted to max. 3 receiving servers.
Figure 4-29 Network Menu – Alarm Server
Server IP 1...3 Enter the IP - addresses of the receiving alarm servers
Protocol Type Select the protocol type:
UDP: User Datagram Protocol
TCP: Transmission Control Protocol
Note: Use UDP only for LAN applications, this mode is not safe for Internet
connections.
Port Transmission port for network alarm messages
Network ID Enter the network ID (Unique ID) for network alarm.
Note: 1. The ID must contain 10 numbers.
2. Only numbers are valid characters
3. Do not use leading zeros.