Instruction manual

54
HD Temperature:
Figure 4-13 Alarm & Event Menu – Event - HD Temperature
Log Check box to record HDD temperature events in the log.
Buzzer Check box to enable buzzer when hard drive’s temperature is over the “Temp.
Warning Limit”.
Email Notify Check box to enable email notification when HDD temperature is over the
“Temp. Warning Limit”. Email operation requires that valid email settings have
been entered in the Network Setting/Email setup screen.
Network Alarm Check box to send out a network alarm to client PC. (requires PowerCon
software and setting up Alarm Server in Network Setup menu)
Stop Recording Check box to stop recording when HD’s temperature is over the “Temp. Warning
Limit”.
Temp. Warning Limit Sets the trigger temperature for HD Temperature event actions. Choose
between 55C /131F or 85C /185F.
Alarm Output Selection of relay output as event reaction “NONE” (not active), “1” ~ “4” for the
relay (in 4 channel version is only 1 relay available).
Output Type Output action will be Transparent and cannot be changed (alarm output remains
as long as the alarm condition is active).