Instruction manual

50
4.5 Alarm & Event Setting
Figure 4-10 is a screenshot of the ALARM & EVENT SETTING MENU. This menu will walk you through
alarm and event setup.
Figure 4-10 Alarm & Event Menu - Alarm
4.5.1 Alarm
Alarm Select the alarm input from 1 to 4/9/16.
Enable Check box to enable response to that alarm trigger.
Log Check box to record these alarm events in the log.
Pre-alarm Record Check box to start copying recorded video to the hard disk from several moments
before the alarm event. (Pre-alarm recording rate will follow “Normal” frame rate
setting)
Buzzer Check this box to enable the buzzer when an alarm occurs.
Main Monitor Main monitor display options when a motion occurs.
No change No change on the main monitor display.
Full screen A full screen of the active camera will display on main monitor
Call Monitor Call monitor display options when a motion occurs.
No change No change on the main monitor display.
Full screen A full screen of the active camera will display on main monitor.
Record Select which camera(s) will start recording in response to this alarm event.
Email Notify Check box to enable email notification when an alarm occurs. Email operation
requires that valid email settings have been entered in the Network Setting/Email