Instruction manual

48
mode. When schedule recording is disabled, as the default the DVR will
automatically begin recording when it is first turned on.
Time Stamp Select if the time and date will display while recording. Choose the
location for the time display from Top, Bottom or Off.
Record Status
Relay Output
The ECOR264 allows monitoring the record status at a relay output
None: Relay will not react on record mode change
1 ~ 4: Select 1 relay output 1 to 4. (for 4 channel version only 1
available).
The relay is active (powered) in record mode ON, so it will also
react in case of power loss.
Auto Erase Video The hard drive will automatically erase video after it has been on the hard
drive for the selected number of days. To use the maximum hard drive
space, choose “OFF”. (See Record Overwrite and notes above.)
4.4.2 Built-in Calculator
The built-in record period calculator can give a rough estimation of the total recording time for the DVR with
current settings. In order to compute as accurate an estimate as possible, please enter your estimates for
the hours per day you expect recording to take place due to motion events and due to other alarm
conditions.
Figure 4-8 Record & Play Menu-Built-in Cal.
Motion Enter the expected number of hours per day due to motion recording.
Alarm Enter the expected number of hours per day due to alarm recording.
If the total Motion and Alarm hours is more than 24 hours, the calculator will assume that
motion and alarm recording take place for the entire 24 hour period.
Click on the “ESTIMATE”
”
”
button to display the result at the bottom of the screen:
" xx days of data can be stored based on current setting"