Instruction manual

47
Apply To This button can be used to copy the video loss settings to other cameras. Select
which cameras you wish to copy to.
"Select All" selects all cameras, “Unselect All” deselects all cameras. Click “OK”
to copy the settings or "Cancel" to exit without copying.
4.4 Record & Play Setting
Figure 4-7 is a screenshot of the RECORD & PLAY SETTING MENU. This menu is used to configure basic
recording and playback settings.
Figure 4-7 Record & Play Menu
4.4.1 Record
Record Overwrite Check the box and disk will begin overwriting when full.
NOTE: Unless this box is checked, the DVR MUST STOP RECORDING
WHEN THE DISK IS FULL. The use of record overwrite is strongly
recommended. If you do not use this feature, please be sure to make
specific arrangements to monitor/be notified when the disk is full.
Schedule Record Activate this check box for using scheduled recording mode.
Note: For Schedule recording, the only way to stop the DVR from
recording is to turn schedule recording off. Pressing any key on the front
panel to attempt to stop recording will not work during scheduling record