Instruction manual

1.5 REAR PANEL

Figure 1-2 Rear Panel

1 Video In: Video input for composite signals 1 V

, BNC, automatic 75 Ohm terminated

2 E-SATA: Reserved for future application.

3 Audio In: 4 x Audio input, RCA socket for line audio signals 1V max., 10 KOhm impedance

4 POWER: DC 12V power socket for external power supply 100 ~ 240 VAC.

5 ETHERNET: RJ-45 network connection 10/100Mb/s Ethernet. There are two LEDs on the LAN jack;

Green LED means network is connected, amber LED flickers in case of traffic.

6 USB 1.0: USB port for USB mouse.

7 RS232 socket: 9-pin D-Sub control input for RS-232 for service purpose.

8 RS485 socket: Interface for remote control via RS-485 keyboards and telemetry control of connected

PTZ devices.

9 MAIN: Composite BNC output for main monitor (Live/Playback/Setup).

10 Call: Composite BNC output for CALL monitor (Live only incl. multi-view).

11 Main VGA: Main monitor - connect a VGA monitor to the VGA output connection. VGA resolution is

1024x768 @ 60 Hz.

12 Alarm In: 4/9/16 (depending on model) alarm N.O. or N.C.inputs for dry contacts.

13 Video Out: Loop-through video outputs 1 V

, BNC (1:1 connected to video inputs).

6 5

7 8

11 12

2 3