Specifications

EBD431e
12
MOSAIC: Set the mask frame mosaic function to ON or OFF.
Note: When the MONITOR AREA has been set to ON by the MOTION
DET setting, only 4 PRIVACY AREA SEL are selectable (1/4 , 2/4 , 3/4 , 4/4 ).
4.2.13 MOTION DET
DETECT SENSE 000~127
BLOCK DISP
ON / OFF / ENABLE
MONITOR
AREA
ON / OFF
AREA SEL
1~4
TOP
000~244 (NTSC) / 000~288(PAL)
BOTTOM
000~244 (NTSC) / 000~288(PAL)
LEFT
600TVL
：
000~378 (NTSC)
、
000~370 (PAL)
700TVL：000~474 (NTSC)、000~468 (PAL)
RIGHT
600TVL：000~378 (NTSC)、000~370 (PAL)
700TVL：000~474 (NTSC)、000~468 (PAL)
DETECT SENSE: Set the motion detection sensitivity.
BLOCK DISP: Control the ON/ OFF status of the motion detection
block display.
MONITOR AREA: Set whether to use the monitoring frames.
AREA SEL: Select the monitoring frame for setup.
TOP: Set the selected top side of the monitoring frame.
BOTTOM: Set the selected bottom side of the monitoring frame.
LEFT: Set the selected left side of the monitoring frame.
RIGHT: Set the selected right side of the monitoring frame.
4.2.14 CAMERA ID