EAN900 Installation Guide Copyright © EverFocus Electronics Corp, Release: Jun. 2009 Ver.
EAN900 This installation guide provides instructions for installing the EAN900 IP Camera. For all other aspects of using this product, please refer to EAN900 User’s Manual, which is available on the CD included in this package. Installation steps 1. Confirm that all of the accessories have been supplied with the network camera from the list below. 2. Confirm that your PC answers to the minimum computer requirements listed below. 3. Setting up the hardware connection.
EAN900 - Power adaptor (x1) - Printed Installation Guide (x1) - Software APs including user’s manual CD (x1) Minimum Computer Requirements -CPU: PC Pentium IV (2.0 GHz or higher) / AMD Athlon (or higher) -VGA card: 32 MB min. 16.7 million colours, with DirectX9.0c support -Memory: 512 MB RAM min.
EAN900 1. Setting Up the Hardware Connection 1. Mount a lens to the camera. (Megapixel lens recommended for high image quality.) 2. Connect the EAN900 Network Camera to a PC with a Cat.5 cable. ○,1 ○,2 Feh Feh Feh ○,9 ○,4 ○,5 ○,6 ○,7○,8 Feh Feh 13 ○ ○,1 SD card: Slot to insert SD card. ○,2 Video output: Loop through connection to the video signal from the Video In connector. Terminated with a coaxial/BNC connector. Note: 1.
EAN900 re-plugged. ○,3 Ethernet RJ-45 port: Connect to LAN via this standard RJ-45 connector. Optional: This socket can also be used to power via PoE (Power over Ethernet) Yellow indicator light: On means 100Mbps, Off means 10Mbps. Green indicator light: On means link, flicking means active, Off means link fail. ○,4 Reset: Loading factory default configuration by pressing the button, which is inside this hole. Please insert the keen-edged device to the hole for 10 seconds.
EAN900 1.
EAN900 2. Network Connection This section tells you how to do different types of network connections to IP cameras. a. Router or LAN connection This is the most common connection that allows multiples PC to see IP cameras/ video servers in pre-existing LAN through a router. By doing port forwarding, you can view camera outside of internal LAN on internet. b. Direct High Speed Connection Direct High Speed Connection connect camera directly to modem without a router.
EAN900 c. One to one connection from PC to IP camera You can connect directly without switch. However, only the PC connecting to camera can view the IP camera.
EAN900 3. Assign IP Address Please install IP utility software from CD before you go through the following process. Please note the following procedures are an example according to EAN900 default values. These values may vary with your network system. Please consult your ISP or network administrators for more detail of network setting reference. IP utility (in supplied CD) is a recommended tool to assign IP address. The default network setting is DHCP.
EAN900 3. The IP address of EAN900 will be automatically detected and shown in the window. Tick the selected EAN900. 4. If you want to manually change the IP setting, YOU MUST CLICK “LOGIN”. You will be asked to enter “User ID” and “Password”. This is a security measure of configuration setting, in order to modify those network configurations of EAN900. EAN900 administrator can only do the setting. Therefore only who has admin authority could modify these settings.
EAN900 5. To change configurations, double click on the value that you wish to make change and enter the desired new value. After the change is done, press “Set Configuration” to confirm setting. Note: Most router support DHCP. However, when you have difficulty of selecting IP type, please consult your IP administrator for the IP type your router support.
EAN900 6. Click “Connect to selected IP” and the browser will automatically connect to the EAN900 network page. 7. You will be asked to enter User ID and Password first. Note: Default user name is “user1” and default password is “11111111”. 8. Now, you will be lead to the live view page of EAN900. 9. Exit: Close IP Utility window to finish your setting.
EAN900 EverFocus Electronics Corp. Head Office: 12F, No.79 Sec. 1 Shin-Tai Wu Road, Hsi-Chi, Taipei, Taiwan TEL: 886-2-26982334 FAX: 886-2-26982380 www.everfocus.com.tw China Office: Room B-05D-1, KESHI PLAZA, Shangdi Information Industry Base,Haidian District, Beijing China 100085 TEL: +86-10-62973336/37/38/39 FAX: +86-10-62971423 www.everfocus.com.cn USA Office: 1801 Highland Ave. Unit A Duarte, CA 91010, U.S.A. TEL: +1-626-844-8888 FAX: +1-626-844-8838 www.everfocus.
