User manual

3. HDMI input mode
Picture
Contrast Adjusts the difference between
the light and dark areas of the picture.
Brightness: Adjusts the brightness of the
picture.
HUE:-50 to +50 (only available AV PAL)
Saturation: 0-100.
Sharpness: 0-100
Color temp: press“+”button Change
the color intensity of the temperature
Selected (Normal.warm.cool.s-RGB. user)
Scale:Full. normal. center
Picture mode: user standard.soft. Vivid
Language Lets you select your preferred
language for the menus: (English.
Chinese. German. French. Spanish.
Portuguese. Russian. Italian)
OSD H-POSITION:Adjust the OSD image
horizontally,press “－“ for desired adjust
parameter option until satisfactory value is
achieved, H-position moves the OSD
position left (0-50) or pressing the “+
“ button. H-position moves the OSD
position right (51-100)
OSD V-POSITION: Adjust the OSD
image vertically by pressing the ＋ or －
button.V-position moves the OSD position
up or down. 0-100
DURATION:5-60
HALFTONE:0-100
BACKLIGHT: HIGH MID LOW
MEM-RECALL:press + key will be reset to
the factory defaults
Sleep-timer: Lets you set the monitor to
turn off after a given amount of time
(OFF .15min.30min.45min.60min)
DLC: ON / OFF
NOISE REDUCTION：（OFF、 LOW 、
HIGH）
HSTART、HSIZE、VSTART、VSIZE：
Adjust the OSD image horizontally /
Vertically by pressing the “-“/ “+” button
AUDIO
BASS- Adjustment range:0-100
TREBLE- Adjustment range:0-100
BALANCE- Adjusts how much audio is
sent to the left and right(-50 to +50)
The intermediate value is 0,when
indication value of balance increases
toward +50, sound of the right and left
speaker becomes stronger and weaker,
respectively, when indication value of
balance decrease toward -50 sound of the
right and left speaker becomes weaker
and stronger
Sound Mode Provides special
processing through your speakers
(depending on the setting you chose as
your Sound Type). The available audio
modes are: User.Standard. movie. music.
AVC (Automatic Volume Control)
ON & OFF
OSD
FUNCTION
17
16