CCTV LCD MONITOR User manual
Table of contents Important safety information------------------------------------------------------- 2~4 Contents----------------------------------------------------------------------------------- 5 Connection------------------------------------------------------------------------------- 5 Rear interface-------------------------------------------------------------------------- 5 Connection under various signal input mode---------------------------- 6 Connecting the Monitor Cables to your Computer----------
MOUNTING ● Place the monitor on a secure table or have it properly mounted to the wall. Do not hang anything on the monitor. Caution: The wall mount must bear a minimum of five timesThe monitor’s net weight without causing damage.To mount your MONITOR to the wall 3 You need to remove the base first before attaching the wall mount. A. Place the MONITOR face down on a surface that is soft, yet strong enough to hold the MONITOR. B.
This connection allows you to connect to a PC or DVR. Connect one end of a 15-pin monitor cable to the VGA VIDEO jack on the monitor and the other end to the PC or DVR's video output jack. Note, if your PC's video output isn't 15-pin, you'll need an adapter that can connect to a 15-pin monitor cable. Connect your audio cable. Connect a 3.
CONTROLS & FUNCTIONS Ⅰ、Front control (a) 5keys series Power Turn On & off the monitor Power-s Back light : high, mid , low Scale : normal, center, full SOURCE MENU - + POWER 1. POWER: Turn the monitor on or off. 2. SOURCE: Press this button to switch between input modes AV1、 AV2、HDMI 、VGA 。On-screen OSD mode, press this button (move up or down) to select sub menu. 3. MENU ： Press to view the On-screen OSD of the unit ， Submenus,features and settings differ according to input mode.
the remote control window.The effective receiving scope for the signal is 3 meters to the front of the remote control window, 1. VGA input mode 1. To ensure a normal operation, the remote control should not be dropped or damaged in any way .It should also be kept dry and away from all heat sources. 2. Battery replacement is necessary when the remote controller acts inconsistently or uneffective.
OSD FUNCTION Language Lets you select your preferred language for the menus: (English. Chinese. German. French. Spanish. Portuguese. Russian. Italian) H-POSITION:Adjust the OSD image horizontally,press “－“ for desired adjust parameter option until satisfactory value is achieved, H-position moves the OSD position left (0-50) or pressing the “+ “ button. H-position moves the OSD position right (51-100) V-POSITION: Adjust the OSD image vertically by pressing the ＋ or － button.
2. AV input mode FUNCTION Picture OSD 14 Brightness: Adjusts the brightness of the picture. Contrast Adjusts the difference between the light and dark areas of the picture. HUE:-50 to +50 (only available AV PAL) Saturation: 0-100. Sharpness: 0-100 Color temp: press“+”button Change the color intensity of the temperature Selected (Normal.warm.cool.s-RGB. user) Scale:Full. normal. center Picture mode: user standard.soft. Vivid Language Lets you select your preferred language for the menus: (English.
3. HDMI input mode FUNCTION Picture OSD 16 Contrast Adjusts the difference between the light and dark areas of the picture. Brightness: Adjusts the brightness of the picture. HUE:-50 to +50 (only available AV PAL) Saturation: 0-100. Sharpness: 0-100 Color temp: press“+”button Change the color intensity of the temperature Selected (Normal.warm.cool.s-RGB. user) Scale:Full. normal. center Picture mode: user standard.soft. Vivid Language Lets you select your preferred language for the menus: (English.
