User's Manual

EVS200A/EVS200AW
24
Press Apply to apply the setting changes or Reset to reset without saving the
change.
Video Recording Setting
User can set video recording by selecting one of the enabled video streamings.
This will allow user to view live images as well as to record video of the other
video streaming.
Video Stream: Select video recording stream from any enabled stream.
Video File format: Recording file will be saved as AVI or ARV, select which file
format to be used.
Press Apply to apply the setting changes or Reset to reset without saving the
change.
Note:
1. User can assign one stream for each channel
2. EVS200 should record both channels, specified by the streams here. If not
enough computation power supported, only storing I-frame is allowed.
3. The stream1 of each channel is always enabled to have motion detection feature.
4. Two D1 H.264 compressions for each channel (stream 1) can be supported
computation wise.
5. The stream 1 for each channel allows D1, Half-D1, and CIF. The stream 2 of each
channel allows CIF and QCIF resolution. Basically stream 1 is for storing and
stream 2 requires smaller bandwidth, good for transmission.
Note: Total frame rate cannot exceed 60 fps.
System performance may be influenced if user enables 4 video streams
simultaneously.