Owner`s manual

ManualsBrandsEverex ManualsHome building and DecorEverdisk

1.

From

the

DISK

Main

Menu,

press

the

[F4] key,

Logical

Format.

2.

The

program

will

ask

for

which

physical

disk

to

format,

whether

to

copy

the

DOS

system

files

to

;he

disk,

and

an

optional

disk

label.

The

software

automatically

defaults

to

physical

drive

1;

select

2

to

logically

format

the

partitions

in

physical

drive

2.

If

you

are

formatting

the

Primary

DOS

partition,

enter

Y

to

copy

the

DOS

system

files;

otherwise

enter

N.

If

you

want

a

volume

label

for

your

drive,

enter

a

volume

label

name

up

to

11

characters

long.

3.

Press

the

[FS]

key

to

begin

the

logical

format.

This

process

takes

a

few

minutes

to

complete

so

please

be

patient.

4.

When

the

logical

format

is

completed,

a

message

will

prompt

you

to

replace

the

EVERDISK

utility

diskette

with

the

DOS

system

diskette.

5.

After

you

insert

the

DOS

system

diskette,

press

the

[Enter]

key

to

transfer

your

DOS

system

files

to

the

hard

disk.

Press

[Enter]

again;

you

will

be

prompted

to

replace

the

DOS

system

diskette

with

the

EVERDISK

utility

diskette.

51