Owner`s manual

ManualsBrandsEverex ManualsHome building and DecorEverdisk

6.3.4 Deleting Partitions

If

you

need

to

delete

a

partition,

use

the

following

instructions:

1.

Choose

the

physical

drive

that

contains

the

partition

you

want

to

delete.

The

software

defaults

to

physical

drive

1;

press

the

[F6]

key

to select physical

drive

2.

2.

To

select

the

partition

you

want

to

delete, press

the

[F2]

key

to

move

the

cursor

to

the

Partitions

menu

field, use

the

up

and

down

cursor

keys

to

select

the

partitions

you

want

deleted,

and

press

the

[F2] key

again

to

confirm

your

selection. WARNING:

If

you delete the

Primary

DOS

Partition, the

hard

disk drive will not

be

bootable

from

DOS!

3.

Press

the

[F8]

key

to

delete

the

chosen

partition;

heed

the warnings about losing data

if

you delete the partition.

Make

sure

the

partition

you

delete

does

not

contain

valuable data.

6.4

Logical Formatting

The

logical

formatting

process

organizes

the

data

blocks,

or

clusters,

on

the

hard

disk

drive

and

transfers

the

DOS

system files

to

the

drive.

You

will

need

a

DOS

system

diskette

to

complete

the

logical

formatting

process.

50