Owner`s manual

ManualsBrandsEverex ManualsHome building and DecorEverdisk

5.

Use

the

up

and

down

cursor

keys to

move

between

the

Enter number

of

cylinders

in

partition

and

Enter starting

cylinder

of partition fields.

Enter

the

values you want,

and

press

the

[F8] key to

create

the

partition.

6.

The

new

partition

will

appear

in

the

Partitions menu.

Now

that

a

DOS

partition

exists

on

your

drive, press

[F9]

to

return

to

the

Partitioning

Main

Menu,

then

press

[F4],

Activate partition,

to

make

the

partition

bootable

from

DOS.

You

can

proceed

to logically

format

your

drive

by

pressing

the

[FlO]

key

to

return

to

the

DISK

Main

Menu.

NOTE: You must activate your

Primary

DOS partition

for

the drive to be bootable

from

DOS!

If

your

drive

has a

capacity

greater

than

32

megabytes,

you

have

two

options

available

to

make

the

rest

of

the

drive

usable

by

DOS:

create

an

Extended DOS

partition,

or

create

a Super DOS

partition.

6.3.2

Creating Extended

DOS

Partition

An

Extended

DOS

partition

contains

one

or

more

"sub-

partitions" called Logical drives,

with

each

Logical

drive

up

to 32

megabytes

in

size.

For

DOS

2.0

to

3.2,

you will

need

the

EVDISK.SYS device

driver

to access these logical drives;

for

PC-DOS

3.3,

DOS will

automatically

recognize

the

extra

logical drives

without

the

EVDISK.SYS

device

driver.

46