Owner`s manual
,-....,
3.
Press
[Ctrl]-[Alt]-[Del]
to
reboot
the
system;
this
will
run
the
EVEREXl.EXE file.
NOTE:
The
DOS system diskette with this
AUTOEXEC.BAT file must be
run
each time the system
is
booted
for
the computer to access the
hard
disk drive.
6.2
Physical Formatting
1.
Boot
up
the
system
with
the
DOS
system
diskette
in
drive
A.
Then
replace
it
with
the
EVERDISK
utility
diskette
and
type:
DISK [Enter]
2.
From
the
DISK
Main
Menu,
press
the
[F2] key, Physical
Format,
to
begin
the
physical
formatting
process.
3.
You
will see
the
following
menu
fields: Enter physical
disk number, Enter number
of
cylinders
in
disk, Enter number
of
heads
in
disk, Enter disk interleave factor
(1
to
9),
and
Do
disk media test after format (YIN).
Use
the
up
and
down
cursor
keys
to
move
between
the
fields.
As
the
physical
description
of
the
hard
disk
drive
is
determined
by
the
SW1
settings
on
the
EV-390/391/392
controller,
you
cannot
adjust
the
total
number
of
cylinders
and
heads
in
the
drive.
For
the
disk
interleave
factor,
we suggest
entering
the
43