Owner`s manual

Section 5: Physical Installation
Because of the large number of procedures needed to install
a hard disk drive in your system, we strongly urge you to
read through this section thoroughly before you install the
drive. This section contains information on how to install
internal and external drives.
NOTE: Since
the EVERDISK subsystem requires extensive
amounts of work inside
the system unit during the physical
installation process, we suggest having a reputable dealer do
the
installation for you. Also, IBM PC owners should consider
upgrading the power supply
for the hard disk subsystem to
work properly.
5.1 Installing the Controller
1. Remove the hard disk drive, controller board, cables,
mounting hardware and the EVERDISK software
diskette from the carton. Save the packaging materials,
boxes and payment receipts.
NOTE: If you ever return your EVERDISK hard disk
subsystem to Everex Systems
for any reason without
proper packaging, your warranty may be affected. Please
read the warranty card included in the packaging; the
warranty will not be in effect until the warranty card is
filled out and returned to Everex Systems.
;---.
2. Turn OFF the system and remove all power cables
from the system. Clear an area around your computer
to leave plenty of room to work.
27