Owner`s manual
2.2
Quick Installation (External Drive)
1.
Configure
the
SWl
jumper
on
the
controller
board
for
the
type
of
drive you have.
2.
Install
the
controller
board
in
your
system.
3.
If
applicable,
connect
a 4-wire
cable
from
the
power
supply
to
the
controller.
4.
Connect
the
37-pin
cable
to
the
37-pin
connectors
on
the
controller
board's
mounting
bracket
and
the
external
hard
disk subchassis.
5.
If
applicable,
connect
the
AC
power
cord
to
the
hard
disk
subchassis
FIRST,
then
connect
the
other
end
to
the
AC
wall outlet.
6.
Turn
on
the
subchassis
FIRST;
then
turn
on
the
computer.
7.
Format
the
hard
disk
drive
with
the
instructions
In
Section
6.
9