Owner`s manual
User
Precautions
To
avoid
possible
hazardous
situations
and
to
prevent
damaging
your
EVERDISK
subsystem, please
read
the
following
precautions
carefully.
1.
Turn
OFF
your
system
and
disconnect
the
power
cable
before
you
begin
the
installation. Make sure NO power
goes to your system!
2.
Clear
an
area
around
your
computer
to
make
working
on
your
computer
easier.
3.
The
hard
disk
drive
and
drive
controller
are
easily
damaged
by static electricity; to avoid
such
damage,
touch
the
system chassis
before
handling
the
drive
and
controller,
and
try
not
to
touch
the
circuitry
on
the
,-..,
drive
and
controller.
Also, limit
your
movements
as
much
as possible as you
work
on
your
system.
4.
The
hard
disk
drive
contains
fragile
parts
that
are
easily damaged; please
handle
the
drive
as
gently
as
possible.
5.
Do
not
remove
any
stickers
attached
to
the
metal
side
of
the
drive, as this will void
the
warranty.
6.
Do
not
open
the
cover
of
the
external
drive
subchassis;
this will void
the
warranty,
and
some
internal
parts
may
produce
electrical
shock.
4