Owner`s manual

Installing the EMM.SYS Program
Expanded memory in your computer can only be accessed
when it is managed by the expanded memory manager
program EMM.SYS. This program is provided on the
Everex Systems utility diskette. Most systems have a
CONFIG.SYS file of "chores" for the computer to perform
automatically every time it boots up. You need to add the
line device = emm.sys to the CONFIG.SYS file.
1. Insert the Everex Systems utility diskette into floppy
disk drive A and type:
cd\
copy a:emm.sys c:\
[enter]
[enter]
2. We recommend using a line editor or your word
processing application program to load the file called
CONFIG.SYS; this file is stored in the root directory of
your system disk. You need to add the device driver
emm.sys into CONFIG.SYS so your expanded memory
will always be accessible. If you do not have a line
editor or word processing program to modify or create
the CONFIG.SYS file, create one now with the DOS
command COPY CON CONFIG.SYS.
3