Owner`s manual

2 The chips on Bank 0 and Bank 1 (which are used
for base memory upgrading) are either improperly
installed or defective. See Appendix 5: If System Boot
Fails on how to remedy this problem.
Q. I have difficulty in accessing the expanded memory on the
RAM
3000 Deluxe. What should I do?
A. Please make sure you followed the instructions in
Section 3.3.2: EMS Mode Configuration in order to
configure the board properly for EMS mode and the
instructions Section 5.1: EMM.SYS EMS Device Driver to
properly install the EMM.8YS expanded memory device
driver ..
59