Owner`s manual

A Note About Expanded Memory RAM Disks:
If you define your EDISKSYS RAM disk in expanded
memory (using the "Ix" parameter), it is very important that
you define the expanded memory software driver in your
CONFIGSYS file before you define your EDISKSYS RAM
disk.
For expanded memory RAM disks, you create the following
CONFIGSYS file (if you are using the EMM.syS software
device driver on the RAM 3000 Deluxe software diskette):
copy con: config.sys
device
= emm.sys
device
= edisk.sys Ix
[F6]
[Enter]
[Enter]
[Enter]
[Enter]
This CONFIG.syS file will create the expanded memory
space first, then create the expanded memory RAM disk.
52