Owner`s manual
[sss]
If
your
RAM
disk resides in base memory,
you must leave
at
least 64KB
of
base
memory
free
for
DOS. EDISK.syS will
check
that
you
have
64KB
of
free base
memory
when
it
is
loaded;
if
the
specified
buffer
size leaves less
than
64KB
for
base
memory,
it
will reduce
the
buffer
size.
If
this still leaves less
than
64KB, EDISK.syS will
not
load.
This
parameter
defines
the
sector
size.
If
you
do
not
define
this
parameter,
the
sector
size is
512
bytes;
if
you
define
this
parameter,
the
valid choices
are
128,
256
and
512.
[ddd]
This
parameter
defines
the
maximum
number
of
entries
in
the
root
directory
of
the
RAM
disk.
If
you do
not
define
this
parameter,
the
maximum
number
of
entries
is
64;
if
you do
include this
parameter,
the
valid
numbers
range
from
2 to
512.
[I e[:o ]],[lx ]
50
EDISK.syS
normally
defines
the
RAM
disk
in
base
memory
unless you include
the
[le[:o]]
or
[Ix]
parameters
on
the
EDISK.syS
command
line.
The
[Ie]
option
informs
EDISK.syS to
load
the
RAM
disk to
AT-only
extended
memory.
The
value [:n]
represents
the
number
of
sectors to
transfer
in
and
out
of
extended
memory
at
one
time.
If
you
omit
[:0],
the
default
transfer
size is
8;
if
you in-