Owner`s manual

1. If your system disk already has a CONFIGSYS file, use
a text
editor to add the line device == emm.sys to your
CONFIGSYS file.
2. If a CONFIGSYS file is not on the system disk, type in
the following lines to create one with the EMMSYS
command line in it. DO NOT do this step if a
CONFIGSYS file already exists on your system disk as it
will overwrite your old CONFIG.SYS file.
cd \
copy con: config.sys
device
= emm.sys
[F6]
[Enter]
[Enter]
[Enter]
[Enter]
3. To confirm that you properly installed EMMSYS, type:
type config.sys
[Enter]
This command should display the line device == emm.sys
on the screen.
4. Press [Ctrl]-[AIt]-[Del] to reboot your system; if no
problems arise, a message similar to Expanded Memory
Manager Installed
will be displayed.
41