INSTALLATION, OPERATION & MAINTENANCE INSTRUCTIONS FOR EVERDURE RANGE HOOD Models Included: RBES63 RBES91 RBES92 IMBERLEY DESIGNED TO PERFECTION
INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS FOR EVERDURE RANGE HOOD RBES63, RBES91, RBES92 CONTENTS SECTION PAGE NO. Important Safety Instructions……………… Appliance Details ………………………… General Information …………………….. What Is Supplied ………….
IMPORTANT SAFETY INSTRUCTIONS IMPORTANT: Read the assembly instruction section and safety precautions of this booklet carefully before removing the contents of this carton. 1. In certain circumstances electrical appliances may be a danger hazard. 2.
APPLIANCE DETAILS Voltage: 220-240V Frequency: 50Hz Lamp Max: 2x20W G4 halogen lamps Rated Input Power: 230W GENERAL INFORMATION Before installing and operating the range hood, carefully read the following important information regarding installation safety and maintenance. Keep this information booklet accessible for further consultations. The appliance has been designed to exhaust cooking fumes externally.
INSTALLATION OF THE EVERDURE RBES63 & RBES91 RANGE HOODS DIRECTLY TO A WALL Ensure that the wall is structurally sound, and is capable of carrying the weight of the range hood. The range hood can be placed at a minimum of 600mm away from an electric cooktop, or 650mm minimum from a gas cooktop. The unit is held to a wall via 3 brackets (supplied with the unit): 1. Hook Bracket. 2. Centre Bracket (flat). 3. Top Bracket (U-shaped).
INSTALLATION OF THE EVERDURE RBES92 RANGE HOOD DIRECTLY TO A WALL Ensure that the wall is structurally sound, and is capable of carrying the weight of the range hood. The range hood can be placed at a minimum of 600mm away from an electric cooktop, or 650mm minimum from a gas cooktop. The unit is held to a wall via 3 brackets (supplied with the unit): 1. Hook Bracket. 2. Centre Bracket (flat). 3. Top Bracket (U-shaped).
OPERATING INSTRUCTIONS Note: Before the unit can be operated, it must be ducted. Connect the plug into the power. FOR RBES92 ELECTRONICALLY OPERATED RANGEHOODS The range hood has indication diagrams to allow you to easily select the fan operating speed required. Push the low button, indicated by a fan with 3 blades, and the motor will run at a low speed. An indicator light will also illuminate. Push it again and the motor will stop.
FOR RBES63 & RBES91 PUSH BUTTON OPERATED RANGEHOODS The range hood has indication diagrams to allow you to easily select the fan operating speed required. Push the low button, indicated by a fan with 3 blades, and the motor will run at a low speed. Push the medium button, indicated by a fan with 4 blades and the motor will run at a medium speed. Push the high button, indicated by a fan with 5 blades and the motor will run at a high speed. Push stop button, indicated by an (O) and the motor will stop.
CLEANING SAFETY PRECAUTION Before cleaning your range hood or performing any maintenance, please ensure that the range hood is turned off at the power point. Do not use abrasive cleaners to clean the range hood. The use of warm soapy water and a cloth are recommended. Ensure that the range hood is cleaned regularly, as a build up of grease and fat may occur otherwise. The filters on the range hood must be cleaned regularly to maintain efficiency, and prevent grease build up.
TROUBLESHOOTING Fault Light on, but motor does not work Possible Cause Solution The impellor leaf blocked Get rid of the blockage The capacitor damaged Replace capacitor (By an authorised person only) Replace motor (By an authorised person only) Replace motor (By an authorised person only) Replace lights The motor bearing damaged or jammed A bad smell from the motor Light damaged Light does not work, motor does not work Oil leakage Shaking of the hood Power cord loose or disconnected One way valve
10 DESIGNED TO PERFECTION 11
All Service and Assembly Enquiries: 1300 766 066 A division of Shriro Australia Pty Ltd 23-27 Chaplin Drive Lane Cove NSW 2066 1300 766 066 www.everdurekitchen.com.
