User Manual

The Everdure Fineline gas space heaters are described as manually operated, portable, flueless
radiant convection heaters for use with Natural gas or Liquid Petroleum gas.
The heater is supplied with an approved flexible hose.
A label is attached to the rear of the heater stating the type of gas for which it has been
manufactured and adjusted.
The heater shall be installed in accordance with the manufacturer's instructions, local gas fitting
regulations, uniform building regulations, municipal building codes, the AGA installation code for
gas burning appliances and equipment and any other relevant statutory regulations.
The heater is intended to be installed as a free standing portable, its portability being restricted by
the number of gas outlet points being provided.
The heater must NOT be BUILT IN.
Special room ventilation may apply in your particular state. If in doubt, contact your local gas
authority.
Locations where strong draughts occur should be avoided as they may cause unsatisfactory
. operationof theheater.
The heater should be installed at least 1 metre from flammable materials, e.g. curtains, and to be
150mm clear of sidewalls. .
This appliance has been fully function tested prior to packaging.
No adjustment is required or available to the user.
No installation is required apart from connection to gas and electrical supplies. (Fig. 1)
Page 1
.'
.c.,.