Installation guide

8
THE EVOLUTION OF PORTABLE OUTDOOR COOKING
TROUBLESHOOTING
Burner will not ignite when using the igniter:
Cylinder valve is not on Turn cylinder valve on
Cylinder is empty Replace with a full cylinder
Igniter is not sparking Remove plate and visually check ignition box for a spark. Check that
the cables to ignition point, or from the valve to the chassis have not
broken or disconnected. Also check the alignment of the sparker. If
there is no spark, contact Everdure Service.
Injector is blocked Clean injector with a toothbrush. Do not drill out or use wire. Do not
remove injector. Contact Everdure Service.
Burner flame is erratic:
Burner is blocked Remove burner and check for obstruction
Flame is burning inside
burner (hissing sound)
Turn off burner, allow to cool and re-ignite (page 7)
Regulator is faulty Contact Everdure Service.
Injector is partially blocked Clean injector with a toothbrush. Do not drill out or use wire. Do not
remove injector. Contact Everdure Service.
Gas is leaking from connections:
Connections are loose Tighten loose connections (do not over-tighten) and leak test under
pressure with soapy water solution (page 4)
Hose has deteriorated Contact Everdure Service.
Gas valve is faulty Contact Everdure Service.
Threads are damaged Contact Everdure Service.
8