Urban Mobile Garden Installation Guide Thank You! You’re only a few steps away from your perfect vegetable garden or elevated planter. We hope you enjoy! Model# E334519W / E334519WG Dimensions 45" L x 19" W x 36" H Before You Start Please read the instructions carefully to familiarize yourself with every detail and step involved. Keep this manual for future reference. Find a suitable space to assemble your new Elevated Garden Bed. You need at least 46” x 20” (117 x 51cm) for the finished product.
Parts List Urban Mobile Garden - 45" L x 19" W x 36" H Top Top Short Board A X2 Short Board B X2 420mm 420mm Bottom Board X6 460mm Bottom 1140mm Post Cap X4 Long Support Board X2 8 holes 8 holes Bottom Long Board X2 5 holes Right Corner Post X2 5 holes Left Corner Post X2 Caster Wheel X4 Bolt X4 1140mm Nut X4 Nut Driver X1 Hex Key X1 Garden Bed Liner X1 + 2pc replacement 2
Assembly Urban Mobile Garden - 45" L x 19" W x 36" H There are 2 different assembly methods providing 2 different planting depths: 10” (as shown in Image 1) and 7.5” (as shown in Image 2). * For deeper planting depth of 10”, please follow steps from page 4. * For easier but shallower planting depth of 7.5”, please go to page 10. IMAGE 1 Depth 1 - 10” from page 4 Long Board 10” (25cm) Long Support Board Bottom Boards IMAGE 2 Depth 2 - 7.5” from page 10 Long Board 7.
Assembly Urban Mobile Garden - 45" L x 19" W x 36" H Start by making sure each corner post is oriented correctly, as shown in Image 3. Slide one short board B into the corner brackets from above. Note: The short boards need to be placed in the inward “U” shape of the brackets, as shown in Image 4.
Assembly Urban Mobile Garden - 45" L x 19" W x 36" H Slide another short board B into the other two corner brackets from above, as shown in Image 5.
Assembly Urban Mobile Garden - 45" L x 19" W x 36" H With the help of another person holding the 2 assembled parts, slide the 2 long supporting boards into the brackets from above. Make sure that one support board goes straight to the bottom, while the other one stays in the middle of the way (don’t push to the bottom), with the top edge between the 2nd and 3rd holes of the post.
Assembly Urban Mobile Garden - 45" L x 19" W x 36" H Put the bottom boards on lower slots of long support boards. Make sure the 2 ends of these bottom boards go into the lower slots and rest in them with enough contact as shown in Image 7. Adjust the height of the higher long support board slightly to hold these bottom boards if necessary.
Assembly Urban Mobile Garden - 45" L x 19" W x 36" H Push down the higher long support board to the bottom, as shown in Image 8.
Assembly Urban Mobile Garden - 45" L x 19" W x 36" H Slide the remaining boards into place, as shown in Image 9. Now you get an elevated garden bed with 10” planting depth. Then, go to page 15, and follow the steps afterwards. Note: If you want to add trellis kit onto this bed, please assemble the extension connectors before this step, to avoid disassembling the boards later.
Assembly Urban Mobile Garden - 45" L x 19" W x 36" H Start by making sure each corner post is oriented correctly, as shown in Image 3a. Slide one short board B into the corner brackets from above. Note: The short boards need to be placed in the inward “U” shape of the brackets, as shown in Image 4a.
Assembly Urban Mobile Garden - 45" L x 19" W x 36" H Slide another short board B into the other two corner brackets from above, as shown in Image 5a.
Assembly Urban Mobile Garden - 45" L x 19" W x 36" H With the help of another person holding the 2 assembled parts, slide the 2 long support boards into the brackets from above, as shown in Image 6a.
Assembly Urban Mobile Garden - 45" L x 19" W x 36" H Put the bottom boards on the long support boards, as shown in Image 7a.
Assembly Urban Mobile Garden - 45" L x 19" W x 36" H Slide the remaining boards into place, as shown in Image 8a. Now you get an elevated garden bed with 7.5” planting depth. Note: If you want to add trellis kit onto this bed, please assemble the extension connectors before this step, to avoid disassembling the boards later.
Assembly Urban Mobile Garden - 45" L x 19" W x 36" H Carefully flip over the garden bed again so that it lays flat with the long support boards pointing towards the sky. Insert caster wheels into corner brackets, as shown in Image 10 and Image 11.
Assembly Urban Mobile Garden - 45" L x 19" W x 36" H Fix the wheels with bollts and nuts, as shown in Image 12.
Assembly Urban Mobile Garden - 45" L x 19" W x 36" H Fasten bolts and nuts with nut driver and hex key which are included in pack , as shown in Image 13.
Assembly Urban Mobile Garden - 45" L x 19" W x 36" H Flip over the bed again so it stands upright, as shown in Image 14.
Assembly Urban Mobile Garden - 45" L x 19" W x 36" H If necessary, use your rubber mallet to ensure the boards are tightly in place. Cover the brackets with the 4 end caps, as shown in Image 15.
Assembly Urban Mobile Garden - 45" L x 19" W x 36" H For additional stability when mobile, we highly suggest using the included 8 self-tapping screws with washers (Image 16). Fasten 2 screws into each side of the inward facing corner posts using a #2 Phillips screwdriver (not included), as shown in Image 17. Screws also can be fastened from outside, as shown in Image 18. Do not fasten the screws into the same height holes facing to each other on the same post.
Assembly Urban Mobile Garden - 45" L x 19" W x 36" H Unfold the liner and cover the bottom of the garden bed, as shown in Image 19 and Image 20.
Note Urban Mobile Garden - 45" L x 19" W x 36" H Sometimes there might be a misalignment of the Corner Posts as shown in Image 21 and Image 22, which may result in difficulty of sliding boards into the brackets. Please adjust them to the right position so that they are parallel to each other, and perpendicular to the ground.
Bloom On. Everbloom-Garden.com US Patent Pending Subscribe at www.everbloom-garden.com for extra savings and upgrading information! Distributed by: Dynaforge Trading LLC St. Paul, MN55101 Email: service@everbloom-garden.
