Installation Guide

ManualsBrandsEverbilt ManualsHeating, Ventilation, and Air ConditioningSoffit Exhaust Vent

Use and Care Guide

Sofﬁt Exhaust Vent

Installation

ADJUSTING THE SOFFIT

EXHAUST VENT

□ If necessary, adjust your sofﬁt

exhaust vent to ﬁt your duct size.

For 5 in. diameter duct, use a

utility knife to cut off the 4 in. ring.

For a 6 in. duct, remove the 4 in. /

5 in. collar adapter.

4 in. ring

4 in./5 in.

collar adapter

TRACING THE CIRCLE

TEMPLATE

□ Cut out the circle template, and

position it in the midpoint of the

sofﬁt. Trace the circle template

(see the reverse side of the page)

and cut the hole.

POSITIONING THE DUCT

THROUGH THE SOFFIT

□ From the bathroom or kitchen fan,

feed the duct through the opening

in the sofﬁt.

CONNECTING THE DUCT

□ Connect the duct to the sofﬁt

exhaust vent and clamp it to the

appropriate ring size (determined

in step 1).

PLACING THE PRODUCT INTO

THE SOFFIT

□ Place the duct and sofﬁt into the

opening, and ensure the facing is

ﬂush against the sofﬁt panel.

SECURING THE SOFFIT

EXHAUST VENT

□ Fasten the sofﬁt exhaust vent to

the sofﬁt panel using the screws

provided.

Safety Information

This sofﬁt exhaust vent is intended for use on sofﬁt panels at least 16 in. wide with a vertical clearance of at least 6 in. high. Before beginning installation,

make sure the sofﬁt area is free of insulation and debris.

Warranty

WHAT IS COVERED

All merchandise is warranted to be free from defects in workmanship and material for one year from the date of purchase. This includes normal wear and

performance failure on items. The manufacturer will replace or repair at their option.

WHAT IS NOT COVERED

This warranty only covers normal wear and performance failure. It does not cover any malfunction, performance failure, or defect arising from the misuse,

abuse, neglect, or modiﬁcation of the product. Any damage or malfunction inﬂicted upon the product by the user or other external sources, or any failure to

comply with the warnings and instructions, is not covered.

For further assistance visit www.HomeDepot.com.

Item # 608-956

Model # SEVHD

HOMEDEPOT.COM

TOOLS REQUIRED

Phillips screwdriver Utility knife Tin snips

HARDWARE INCLUDED

Screws (3)

Summary of content (2 pages)

PAGE 1
Use and Care Guide Item # 608-956 Model # SEVHD Soffit Exhaust Vent TOOLS REQUIRED HARDWARE INCLUDED Phillips screwdriver Utility knife Screws (3) Tin snips Installation 1 ADJUSTING THE SOFFIT EXHAUST VENT □ If necessary, adjust your soffit exhaust vent to fit your duct size. For 5 in. diameter duct, use a utility knife to cut off the 4 in. ring. For a 6 in. duct, remove the 4 in. / 5 in. collar adapter.
PAGE 2
Guía de uso y cuidado Artículo # 608-956 Modelo # SEVHD Respiradero de escape de sofito HERRAMIENTAS NECESARIAS Destornillador Phillips Navaja HERRAJE INCLUIDO Tijeras de hojalatero Tornillos (3) Instalación 1 CÓMO AJUSTAR EL RESPIRADERO DE ESCAPE DE SOFITO 2 □ Si es necesario, ajuste el respiradero de escape de sofito para que se adecue al tamaño del conducto. Para un conducto de 5 pulg. de diámetro, use una navaja para cortar el anillo de 4 pulg. Para un conducto de 6 pulg.