Instructions / Assembly

7 HOME
DEPOT.COM
Operation
1
Connecting power
2
Oper
ating the pump
□ When the floa
t switch (1) moves up over the top of the
pump, the pump begins to operate. When the water lowers
to a certain level, the float switch (1) will turn the pump off.
NOTE: Ensure the pump is subm
erged in water. Running the
pump dry can damage the p
ump.
Care and Cleaning
To clear a pump that is clog
ged with debris:
□ Unplug the pump to disconnect the electrical power.
□ Unscrew the screw (4) on the volute and the five screws (3) on the seal plate. Remove the volute (1).
□ Remove debris from around the impeller (2).
□ Reassemble the pump.
4
Please contact
1-844-883-1872 for further assistance.
□ Plug the pump power cord plug into the piggyback switch
plug outlet.
□ Plug the switch plug into a 115V GFCI power outlet.
1
□ Allow pump to operate through several on-off cycles.